DCP Cemflow Topping
DCP Cemflow Topping is designed as an industrial grade floor topping for upgrading and renovating new and existing internal floors. Cemflow Topping is supplied as a pre-blended dry powder designed for application between 5mm to 15mm (in one application) to provide a finished industrial floor. Cemflow Topping is self-smoothing, dimensionally stable, and fast drying.
Uses of DCP Cemflow Topping
It is suitable for use in a wide range of industrial environments such as warehouses, food processing plants etc. subjected to medium to heavy traffic.
Cemflow Topping is suitable for application on to a wide range of subfloor types, including; sand and cement screeds, concrete, terazzo, granolithic, epoxy and polyurethane resins and waterproof membranes. Typically Cemflow Topping can be pumped up to 1500m² per day. Coverage of 600m² can be achieved when hand applied, dependent upon manpower and equipment used.
Pour or pump the mixed material onto the prepared surface and allow to attain a smooth finish. The use
of a spiked roller will help eliminate entrapped air and smooth out fl ow lines. Apply at a thickness between of 5mm to 15mm in one pass only.
For the application of any seal coats, please refer to relevant Technical Data Sheets.
Not quite what you’re looking for? Click here to browse more of our Don Construction Product range.
Want to learn more about Don Construction Products? Click here to view more information.