DCP Neoprene Primer
DCP Neoprene Primer is designed to be used as a general purpose primer for dusty or absorbent surfaces to promote adhesion and to prevent unacceptably rapid drying of adhesive and smoothing underlayments.
Uses of DCP Neoprene Primer
For use on absorbent surfaces such as concrete, sand/cement and synthetic anhydrite screeds; plywood, hardboard and chipboard. It is non flammable, suitable for use over normal underfloor heating installations and is coloured green to provide the user with visual control of coverage uniformity.
Coverage: 5 litres of Neoprene Primer mixed with 20 litres of water will cover approximately 100m².
Floor surfaces must be sound, smooth, dry and free from contaminants that may prevent adhesion. Concrete and sand/cement screeds must be fully cured and any laitance or surface treatments must be removed. Existing adhesive should be mechanically removed until only a minimal firmly bonded residue remains. The temperature of the surface must be above 10°C when the primer is applied to the subfloor and underfloor heating must be off for at least 48 hours before and after application. Ensure the subfloor is dry and incorporates an effective damp proof membrane.
Mixing & application
Shake well before use. For absorbent surfaces add one part Neoprene Primer to 4 parts of clean cold water and stir until thoroughly dispersed. Apply the Neoprene Primer evenly to the whole surface using a soft broom/ brush and allow it to dry completely. Apply a further application, adding one part Neoprene Primer to 3 parts clean cold water and allow to dry thoroughly
All information on consumption, cleaning and storage can be found on the technical datasheet.
Not quite what you’re looking for? Click here to browse more of our Don Construction Product range.
Want to learn more about Don Construction Products? Click here to view more information.