Please note: This product has a minimum order quantity of 5
Flowcrete Flowprime Fastucure – 2-component epoxy resin primer
Flowcrete Flowprime Fastucure – 2-component epoxy resin primer. Flowprime Fastcure Hardener B is used with a standard Flowprime Base A component, for cementitious substrates. 2.6 parts of component A are mixed with 1 part of component B, by weight. Add all of Hardener B to Base A. Mix with a slow speed drill and helical spinner, taking care not to entrain air.
For priming of concrete and screeds, prior to overcoating with resin toppings e.g. Flowshield SL, Flowtex, Mondéco Earth etc. Enables fast track installation of subsequent coatings.
The recommended substrate temperature is 15 – 25°C, but no less than 10°C.
The temperature of the substrate should exceed the “dew point” by 3°C during application and hardening.
Temperatures should not fall below 5°C in the 24hrs after application.
Application time/pot life
Ready-mixed product should be used within 15 minutes at a temperature of 20°C.
At higher temperatures the application time is shorter.
Curing time (at 20°C)
Can be overcoated after 6 hours.
Maximum overcoat time 12 hours.
The product is fully hardened after 5 – 7 days.
High humidity in early stages of cure can result in white, matt surfaces (blooming).
Resin screeds/mortars can be applied into wet or tacky primer or, if they are to be applied onto a tack free
primer, a sand scatter should be applied to ensure the mortar does not slip during compaction.
Not quite what you’re looking for? Click here to view more of our Flowcrete/Isocrete range.
Want to see how Flowprime Fastcure and other Flowcrete/Isocrete products have been used? Click here to view a range of Flowcrete/Isocrete Projects.