Isocrete 1500 – Pallet of 40 x 25kg bag

£825.00 exl. VAT

Per Unit

Description

SKU 11707131911117784 Category

Fast Drying Hand (0 – 20mm) or Pump Applied (4 – 20mm) Easy Levelling Screed.

  • Fast track application
  • Self levelling
  • Rapid installation – 2,000m2 per day for 7mm thickness
  • Fast setting – walk on after 2-4 hours under suitable conditions
  • Fast drying – install moisture sensitive finishes after 24 hours at screed thicknesses below 10mm
  • Single pack
  • Protein Free- will not harbour bacteria

You May Also Need...

Contents

Description

Isocrete 1500 – Fast track refurbishment

Isocrete 1500 – Fast track refurbishment & New construction. Manufactured from a combination of natural and recycled raw materials and is free from Portland cement. A fast drying, hand (0 – 20 mm) or pump applied (4 – 20 mm) underlayment, for easy levelling of concrete floors before the installation of floor coverings, e.g. vinyl, carpets, ceramic tiles, wood block linoleum or cork.

Uses

For fast track refurbishment and new construction where floor finishes need to be applied quickly. Suitable for smoothing floors in office buildings, shops, public buildings, schools, hospitals, airports, and prisons. May be used as a screed to receive an epoxy resin finish in areas taking light traffic. For a flowing screed for industrial use, you can use Flowscreed Industrial Top.

Application time/pot life

Do not mix more material than can be used within 10 minutes at a temperature of 20°C. At higher temperatures the application time is shorter.

Application temperature and humidity

The recommended substrate temperature is 15 – 25°C, but no less than 5°C and to a maximum of 25°C.
The temperature of the substrate should exceed the “dew point” by 3°C during application and hardening.
The base slab and air temperatures should not fall below 5°C in the 72 hrs after application.
Ambient humidity should be above 50% RH during application and cure. Fluid screeds should be prevented from drying out too quickly before gaining adequate strength to resist natural shrinkage. Application should take place in a “protected” environment where the temperature remains stable, is draft free and protected from the effects of strong sunlight.

All information on flow rate and water content, curing time and protection can be found on the technical datasheet.

 

Not quite what you’re looking for? Click here to view more of our Flowcrete/Isocrete range.

Want to see how Isocrete 1500 and other Flowcrete/Isocrete products have been used? Click here to view a range of Flowcrete/Isocrete Projects.

Additional information

Suitable for Substrates

Minimum Thickness: 0mm

Maximum Thickness: 20mm

Compressive Strength @ 28 days: 33 N/mm2

Walkable: 2- 4 Hours

Finished Floor Laying After: 24 Hours

Suitable for Substrates: Concrete / Screed

Brand

Flowcrete / Isocrete

Flowcrete has been at the forefront of resin flooring technology for over 30 years. Isocrete has been one of the most respected brands in floor screeding materials since the 1960s and was acquired by the Flowcrete Group in the 1990s. Today the group is one of the most respected flooring materials suppliers worldwide, with a huge range of screeds and coatings.
Isocrete Primer - acrylic emulsion

Technical Information