Isocrete 1500 – Fast track refurbishment
Isocrete 1500 – Fast track refurbishment & New construction. Manufactured from a combination of natural and recycled raw materials and is free from Portland cement. A fast drying, hand (0 – 20 mm) or pump applied (4 – 20 mm) underlayment, for easy levelling of concrete floors before the installation of floor coverings, e.g. vinyl, carpets, ceramic tiles, wood block linoleum or cork.
For fast track refurbishment and new construction where floor finishes need to be applied quickly. Suitable for smoothing floors in office buildings, shops, public buildings, schools, hospitals, airports, and prisons. May be used as a screed to receive an epoxy resin finish in areas taking light traffic. For a flowing screed for industrial use, you can use Flowscreed Industrial Top.
Application time/pot life
Do not mix more material than can be used within 10 minutes at a temperature of 20°C. At higher temperatures the application time is shorter.
Application temperature and humidity
The recommended substrate temperature is 15 – 25°C, but no less than 5°C and to a maximum of 25°C.
The temperature of the substrate should exceed the “dew point” by 3°C during application and hardening.
The base slab and air temperatures should not fall below 5°C in the 72 hrs after application.
Ambient humidity should be above 50% RH during application and cure. Fluid screeds should be prevented from drying out too quickly before gaining adequate strength to resist natural shrinkage. Application should take place in a “protected” environment where the temperature remains stable, is draft free and protected from the effects of strong sunlight.
All information on flow rate and water content, curing time and protection can be found on the technical datasheet.
Not quite what you’re looking for? Click here to view more of our Flowcrete/Isocrete range.
Want to see how Isocrete 1500 and other Flowcrete/Isocrete products have been used? Click here to view a range of Flowcrete/Isocrete Projects.