Mapei Adesilex PG4 (2-Part)

£81.41£368.70 exl. VAT

Per Unit

Description

Two Component Thrixotropic Epoxy Adhesive with Modified Rheology for Bonding Mapeband, TPE, PVC Braces, Hypalon and for Structural Bonding.

  • Recommended both for bonding synthetic braces used in waterproofing applications and for repairing, sealing and bonding.
  • Extended workability time
  • Low viscosity
  • Suitable to use even at high temperature

*Please note there is a £100 minimum order when ordering Mapei products.*

You May Also Need...

Contents

Description

Mapei Adesilex PG4 – Two component adhesive for structural bonding

Mapei Adesilex PG4 – Two component adhesive for structural bonding. Adesilex PG4 is a two-component adhesive based on epoxy resin, fine-grained selected aggregates and special additives blended according to a formula developed in Mapei’s own Research & Development Laboratories. Unlike Adesilex PG1 and Adesilex PG2, two-component thixotropic epoxy adhesives use for structural bonds, this product is characterised by its extended workability time. This property makes the product easier to use, even at high temperatures. Adesilex PG4 is also characterised by its low viscosity and, as a result, offers good wetting of the substrate. This makes it easy to apply with a spatula on horizontal surfaces, vertical surfaces and on ceilings without dripping, due to its high thixotropy. After preparation, Adesilex PG4 hardens in 5 hours (at +23°C) through chemical cross-linkage without shrinking. The composite obtained is characterised by its high bonding properties and by its considerable mechanical strength. Adesilex PG4 can be applied even on very damp surfaces as long as there is no standing water. Adesilex PG4 meets the requirements defined by EN 1504-9 (“Products and systems for the protection and repair of concrete structures – Definitions, requirements, quality control and evaluation of conformity – General principles for the use of products”) and the minimum requirements claimed by EN 1504-4 (“Structural bonding”).

Mapei Adesilex PG4 Uses

Adesilex PG4 is particularly recommended both for bonding synthetic braces used in waterproofing applications and for repairing, sealing and bonding elements in concrete, reinforced concrete, metal and natural stone.

  • Waterproofing wide joints by bonding pre-formed straps (PVC, Hypalon, Mapeband and Mapeband TPE)to the concrete.
  • Rigid structural bonding of prefabricated concrete elements.
  • Sealing large cracks in industrial floors subject to traffic.
  • Bonding slabs and pipes in concrete and fibre-reinforced concrete.
  • Bonding steel to concrete.
  • Bonding metal or TPE drains (Drain Front)

 

Not quite what you’re looking for? Click here to browse more of our Mapei range.

Want to see how Mapei Adesilex PG4 and other Mapei products have been used? Click here to view a range of Mapei Projects.

Additional information

Size

6Kg, 30Kg

Suitable for Substrates

Minimum Thickness: 1mm

Maximum Thickness: 2mm

Compressive Strength @ 28 days: N

Walkable/ Grout: 2 Hours

Open for Traffic: 7 Days

Suitable for Substrates: Concrete / Screed / Steel

Brand

Mapei

Since its beginnings in 1937 Mapei has grown so that it can now claim to be the worlds largest producer of adhesives and chemicals for the construction industry. The company has always believed in investing strongly in R&D and product development, and it is perhaps this more than anything that has led to their success. Mapei has been in the UK since 1989 with a manufacturing plant now producing over 100,000 tonnes across a vast product range.

Technical Information