Regupol CMS Bond 100 – 15 Kg

£82.23 exl. VAT

Per Unit

Description

SKU 103091408235663731 Category

High Performance Acoustic Adhesive.

  • Solvent free
  • Low VOC
  • High performance
  • Water based

You May Also Need...

Contents

Description

CMS Bond 100 – Water based, high performance acoustic adhesive

CMS Bond 100 – Water based, high performance acoustic adhesive. It is suitable for plasticized vinyl floor coverings (including PVC Tiles) together with high density foam backed carpets. CMS Bond 100 is solvent free, with low VOC.

Uses

Surface preparation

  • Suitable sub-flooring substrates include concrete, flooring grade hardboard, plywood, chipboard, sand/cement screed, proprietary good quality self-smoothing underlayments. Asphalt and surface membranes should be treated with at least a 3mm coating of the latter before applying adhesive.
  • Site conditions should comply with the latest British Standards editions: BS 8102 (Code of Practice for protection against moisture from the ground), BS 8203 (Code of Practice for installation of resilient floor coverings), BS 5325 (Code of Practice for installation of textile floor coverings), BS 8204 part 1 (Code of Practice for installation of self levelling screeding compounds), and supplementary specifications.
  • Surfaces must be level, firm and clean, free of loose material, mould, oil, grease, organic growth and surface moisture (under 75% RH).
  • Uneven, dusty or friable surfaces should be treated with the appropriate universal primer and screed.
  • It is essential that suitable damp proof membranes be in place to prevent rising damp.
  • Under floor heating should be turned off for at least 48 hrs prior to and after application.
  • Particular attention must be paid to the floor covering manufacturer’s instructions. i.e. any pre storage conditions prior to fitting.

Application

  • Use a notched trowel of dimensions 1.5mm x 5mm or as CFA guidelines.
  • Heavy textured floor coverings may require a larger trowel.
  • Apply adhesive evenly to the substrate and depending on the substrates lay the floor covering while still wet. It is best to allow the freshly applied adhesive to stand for 15-45 minutes depending on the ambient conditions, to build tack before embedding the floor covering.
  • Press firmly into place and roll using a 60/70Kg roller or glider depending on material used. Roll again approximately 1 hr after application.
  • Wait at least 24 hrs before welding vinyl seams.

Not quite what you’re looking for? View the full Regupol range here.

Brand

Regupol

Regupol offer a comprehensive range of acoustic flooring solutions designed to reduce air-bourne and impact noise. Their range of products include solutions which meet sound requirements for part E compliance via pre-completion testing and robust detail routes and include under-screed resilient layers and screed isolation, resilient acoustic floor coverings and high-performance underlayments.

Technical Information