Description
Remmers Epoxy BS2000 – Pigmented, water emulsifiable epoxy resin
Remmers Epoxy BS2000 – Pigmented, water emulsifiable epoxy resin for versatile use. Epoxy BS 2000 New is a pigmented, 2-component, water emulsifiable, epoxy resin primer:
- Silk matt
- Low odour
- Water vapour diffusion-open
- Resistant to alternating frost/thaw cycles
Uses
Remmers Epoxy BS 2000 New is used as a primer or adhesion promoter in the Remmers Water Vapour Diffusion-Open System:
Application examples:
- Warehouses
- Garages
- Parking garages
The substrate must be loadbearing, dimensionally stable, sound, free of loose constituents, dust, oil, grease, rubber tyre marks and other substances that could interfere with adhesion. Tensile strength of the surface of the substrate must be 1.5 N/mm² on average and compressive strength at least 25 N/mm². The substrate should have sufficiently reacted and be loadbearing: Concrete max. 6 % by mass Cement screed max. 6% by mass
In the case of anhydrite and magnesite screeds, it is essential that the penetration of moisture from building elements or the ground is ruled out. Examine ceramic covers, old coatings, levelling compounds and interior poured asphalt (AS IC 10) for coating suitability. If necessary, set up trial areas. The substrate should be prepared by suitable measures, e.g. steel shot blasting or a diamond grinder so that it meets specifications. Fill broken out or missing areas in the substrate with the Remmers PCC System or Remmers EP Mortars flush with the surface.
Not quite what you’re looking for? View our full Remmers range here.