Resbuild Gripfast – 5m2

£60.45 exl. VAT

Per Unit

Description

Provides A Slip Resistant Epoxy Coating System For 5 Square Meters Of Surface.

  • Solvent free, low odour
  • Excellent slip resistance
  • Tough and durable
  • Good chemical resistance
  • Hard dry time just 6 hours @ 20C

Please call office to check stock on all Resbuild products.

You May Also Need...

Description

Resbuild Gripfast – Protective coating

Resbuild Gripfast – Protective coating for concrete, metal and wood surfaces. It is supplied in composite packs, each containing sufficient material to provide a slip resistant Epoxy coating system for 5 square metres of surface. Applied in a single coat operation which reduces the curing period of the system prior to trafficking. Apart from the excellent slip resistance characteristics, the coating system has very good abrasion and chemical resistant properties.  The slip resistant aggregate consists of graded Aluminium Oxide.

  • Solvent free, low odour
  • Excellent slip resistance
  • Tough and durable
  • Easily applied
  • Hygienic and easily cleaned
  • Good chemical resistance

Resbuild Gripfast – Protective coating – Description

Resbuild Gripfast is supplied in composite packs, each containing sufficient material to provide a slip resistant Epoxy coating system for 5 square metres of surface. Applied in a single coat operation which reduces the curing period of the system prior to trafficking. Apart from the excellent slip resistance characteristics, the coating system has very good abrasion and chemical resistant properties. The slip resistant aggregate consists of graded

Surface Preparation

  • Concrete shall be a minimum of 21 days old and/or the residual moisture content shall be below 6%. Ensure that the concrete is clean and free from dust,
    laitance, grease, oil, curing compound, and existing paint finishes, etc. Smooth concrete, or concrete with soft laitance, shall be mechanically treated by diamond grinding or grit blasting to provide a clean profiled surface. Should this not be practicable then acid etching, although less preferable, is also an option.
  • Metal surfaces shall be power wire brushed to remove any rust and loose or flaking material. Grit blasting is recommended, where practical, for optimum performance. Coating application should be carried out immediately after preparation.
  • Wood surfaces shall be sanded to a smooth finish, and all previous coating removed. Previously untreated wood shall be sealed with a coat of Resbuild WB Primer.

Not quite what you’re looking for? Browse our full Resin Building Products Range here.

Learn more about Resin Building Products here.

Brand

Resin Building Products

Founded in 1995, Resin Building Products Limited offer a wide variety of resin based materials to meet the most exacting of requirements. They have developed a wide range of materials developed by their own in-house technical team, and have been involved in many prestigious schemes, some of them award winning. They strive to continue developing materials that are at the forefront of the resin industry.
Resbuild Clear Acrylic Resin Based Cureseal 25 Litre

Technical Information