Resbuild SBR

£33.46£1,367.77 exl. VAT

Per Unit

Description

Styrene-Butadiene Co-Polymer Emulsion Which Imparts Beneficial Property Improvements To Cementitious Mixes.

  • Waterproofing action
  • Improves adhesion
  • Reduces permeability
  • Increases Mechanical strength
  • Improves freeze-thaw resistance

Please call office to check stock on all Resbuild products.

You May Also Need...

Contents

Description

Resbuild SBR – Co-polymer emulsion

Resbuild SBR – Co-polymer emulsion which imparts beneficial property improvements to cementitious mixes. After appropriate dilution with water, the resultant liquid may be used to gauge the cementitious mix to the desired consistency. A reduced water to cement ratio leads to superior mechanical properties and resistance to moisture ingress.

  • Plasticising action
  • Waterproofing action
  • Improves adhesion
  • Reduces permeability
  • Increases mechanical strength
  • Up-grades chemical resistance
  • Versatile and easy to use
  • Cost effective
  • Improves freeze-thaw resistance
  • Compatible with many types of cement

Uses

  • Flooring: screeds and patch repairs in dairies, abattoirs, breweries, factories, etc.
  • Bonding additive: renders, slip bricks, tiles, coping stones, etc.
  • Concrete repair: making good structural concrete, increase in effective concrete cover.

 

Surface Preparation – Substrates shall be clean, sound and free from contaminants such as oil, grease, moss, algae, dust and any existing loose or flaking paintwork.

Priming – Surfaces shall be pre-dampened with clean, potable, water, taking care to remove any excess surface water. A 1:1 cement/sharp sand mix should be gauged to a slurry consistency using a 1:1 Resbuild SBR/Water blend. This bonding slurry shall be brushed onto the prepared surface using a stiff brush.

Note: in certain instances it may be deemed preferable to prime with an Epoxy bonding agent such as Resbuild Tackprimer. In such an event the Resbuild Tackprimer should be applied to a dry substrate and be allowed to ‘tack up’ prior to topping. Please refer to the Resbuild Tackprimer product data sheet for additional information.

Polymer modified cementitious toppings – The appropriate design mix material shall be applied
whilst the primer is still tacky, and finished and cured in accordance with good concreting practice. Mix designs can be found on the technical datasheet.

 

Not quite what you’re looking for? Browse our full Resin Building Products Range here.

Learn more about Resin Building Products here.

Additional information

Size

5Ltr, 25Ltr, 200L

Brand

Resin Building Products

Founded in 1995, Resin Building Products Limited offer a wide variety of resin based materials to meet the most exacting of requirements. They have developed a wide range of materials developed by their own in-house technical team, and have been involved in many prestigious schemes, some of them award winning. They strive to continue developing materials that are at the forefront of the resin industry.
Fastpatch - Epoxy resin mortar

Technical Information