Description

Resbuild WB Epoxy Coating

Resbuild WB Epoxy Coating is a high performance, water dispersible Epoxy coating for the treatment of floors and walls. It is designed to be user and environmentally friendly, containing no solvents and being of a very low odour during application. Resbuild WB Coating may be easily applied by brush, roller or airless spray, to provide a decorative, abrasion and chemically resistant coating of excellent durability.

• May be applied to dry or damp surfaces
• Available in a range of colours
• Low odour
• Easily applied
• Excellent resistance to water, oils, skydrol, petrol, dilute acids, alkalis and many solvents
• Very good adhesion to concrete
• Hygienic and easily cleaned
• Matt and Gloss options
• Slip resistant options

Uses

As a floor covering in food factories, abattoirs, dairies, laboratories etc. As a chemically resistant coating for bund areas. As an anti-graffiti coating. As a hygienic, easily cleanable surface on walls, ceilings etc.

Application – Apply by brush, roller or airless spray at a nominal rate of 0.20 to 0.25kg/sq.m. per coat equivalent to a dry film thickness of 100-125 microns. A minimum two coat treatment is recommended, applying subsequent coats after a minimum interval of 16 hours curing. Ensure good ventilation after application, as this speeds up the physical drying stage of the curing process. Should a non-slip finish be required, a suitable Quartz should be scattered onto the first coat of Resbuild WB coating whilst still wet. The following day any excess sand may be swept from the surface using a clean brush prior to application of the second coat.
Alternatively, for a lightly textured floor finish the coating can be supplied with Resbuild Texturing Additive pre-incorporated.

All information on surface preparation, priming and mixing can be found on the technical datasheet.

Not quite what you’re looking for? Browse our full Resin Building Products Range here.

Learn more about Resin Building Products here.