Mapei Latexplan TradeFast 24Kg

£31.20£1,050.00 exl. VAT

Per Unit

Description

  • Two-part rapid setting
  • Can recieve foot traffic within 1 hour
  • Can receive floor coverings in less than 3 hours
  • Suitable for smoothing new and existing substrates prior to the installation of floor coverings

 

 

You May Also Need...

Contents

Description

Mapei Latexplan TradeFast is used for levelling and smoothing differences in thicknesses of 3 to 10 mm (in one application) where rapid installation of all types of floor coverings is required on new and existing substrates. Mapei Latexplan Trade Fast is suitable for high intensity, wheelchair traffic and chairs with castors. Can also be used over most old adhesive residues including bitumen.

Latexplan Trade Fast is also suitable for use with underfloor heating.

Some application examples
Smoothing concrete floors, sand:cement screeds, MAPEI Mapecem and MAPEI Topcem screeds. For smoothing over existing flooring in concrete, terrazzo, ceramic, porcelain tiles and natural stone (after applying a suitable primer if required).

Mapei Latexplan TradeFast is a two-part cement based smoothing compound consisting of a grey powder (part A) containing
special cements, graded silica sands and additives to be mixed with a synthetic rubber latex (part B).

Latexplan Trade Fast can receive foot traffic after approximately 60 minutes and is ready to install floor coverings after
2½-3 hours depending on the thickness and ambient temperature.

Latexplan TradeFast has a very low odour making it suitable for use in confined and inhabited areas, where working
and/or occupation must be maintained.

Mapei Latexplan TradeFast should not be mixed with any additional latex liquid or any water.
Latexplan Trade Fast is moisture tolerant and suitable for use under MAPEI damp proof membranes.

Additional information

Size

24Kg, Pallet of 40 x 24Kg

Brand

Mapei

Since its beginnings in 1937 Mapei has grown so that it can now claim to be the worlds largest producer of adhesives and chemicals for the construction industry. The company has always believed in investing strongly in R&D and product development, and it is perhaps this more than anything that has led to their success. Mapei has been in the UK since 1989 with a manufacturing plant now producing over 100,000 tonnes across a vast product range.

Technical Information