Palace Chemicals Self Level Floor Leveller

£11.25£430.00 exl. VAT

Per Unit


  • High Flow fast levelling to a super smooth finish.
  • Takes foot traffic after 4 hours & tiling after 8 hours.
  • Levels from 2mm up to 12mm in a single application.
  • Can be mixed with water or Palace Self Level Latex.
  • Use Floor Screed latex for heated sub-floors.

You May Also Need...



Palace Chemicals Self Level is a protein free cement-based, subfloor smoothing underlayment that has been formulated to provide a consistently level finish to solid sub-floors prior to laying ceramic or decorative floor coverings, giving a consistently level screed from a 2mm up to 12mm thick. Palace Chemicals Self Level incorporates specially blended cements, finely grade sands and organic superplasticisers, which with the addition of correctly gauged water gives the ideal properties for application to masonrybased floor surfaces such as tamped or worn concrete and sand/cement floor screeds. On non-porous floors such as mastic asphalt, plywood, dense concrete, existing tiles and painted or sealed surfaces, Self Level powder should be mixed with Self Level latex to give improved adhesion to the substrate and allows the product to be used on floors where under-tile heating is to be specified.


Palace Chemicals Self Level when applied over a smooth even non-absorbent floor at an average 3mm depth will cover at a rate of one 20kg bag per 5.0M².

Adequate ventilation is essential during the drying process and any draughts or exposure to excessive heat sources must be eliminated to ensure consistent drying.


Palace Chemicals Self Level when applied at 20°C & 65% RH under ideal site conditions will allow for a working time of up to 20 minutes and then reach initial set after 1 hour. Under
the above conditions it will rapidly cure to allow light foot traffic after 3 hours and will be ready to receive tiles after 4 hours and soft flooring after 24 hours.

Additional information


20Kg bag, Pallet of 54 x 20Kg


Palace Chemicals

Palace Chemicals

Technical Information