Palace Chemicals Wear Top is a dual-purpose internal/external high durability floor screed which can be applied as a sub-floor, self-smoothing underlayment or as a wear resistant surface topping. It has a high degree of abrasion resistance making it suitable for internal & external areas where regular heavy trafficking is expected, whilst its high early strength development makes it a suitable base for receiving decorative wear resistant resin coatings.
Palace Chemicals Wear Top dual purpose underlayment and wear resistant topping suitable for internal and external use up to 20mm is a protein free formulation so may be used in biologically sensitive areas and can be placed from 5mm up to 20mm in one single application,
which is then able to receive foot traffic after 3 hours & vehicle loading after 36 hours. Wear Top is mixed only with water and is suitable for applying over a
comprehensive range of typically encountered structurally resilient floor surfaces including power-floated or tamped concrete, along with existing cementitious & anhydrite*
Wear Top when applied at 20°C & 65% RH under ideal site conditions will allow for a working time of up to 20 minutes and then reach initial set after 1 hour. Under
the above conditions it will rapidly cure to allow light foot traffic after 3 hours and will be ready to receive tiles after 4 hours and soft flooring after 24 hours.
Palace Chemicals Wear Top when applied over a smooth even non-absorbent floor at an average 5mm depth will cover at a rate of one 20kg bag per 2.3M². PALACE WEAR- TOP
is recommended as a final wearing surface but may benefit from a resin coat finish to give a consistent floor shade.
Adequate ventilation is essential during the drying process and any draughts or exposure to excessive heat sources must be eliminated to ensure consistent drying.