Resbuild WB Matt PU Sealer
Resbuild WB Matt PU Sealer (Screedseal) is a single pack, water based, matt sealer specifically developed for use with resin floor screeds to up-grade chemical and abrasion resistance, as well as to enhance the aesthetic appearance. The material is easy to apply, and is fast drying to allow rapid access.
- Easy to apply
- Strong resistance to water, solvents, and other chemicals
- Good abrasion resistance and durability
- Excellent UV stability
- Matt finish
- Can accept light foot traffic after 12 hours @ 20C
For application to coves and upstands, a thixotropic version is available: Resbuild Screedseal T. Used as a chemical and abrasion resistant, matt, sealer for Epoxy and Polyurethane resin floor screeds, often used in conjunction with Resbuild Stone Carpet Sealer. As a matt topcoat for existing coating systems.
Application – Resbuild Screedseal should be stirred thoroughly prior to use. Apply Resbuild Screedseal by squeegee until refusal and then back-roller, using a short pile lambswool roller, to remove any excess.
Take care to avoid ‘puddling’ of the material. Allow to dry for minimum period of 4-8 hours, depending on ventilation conditions.
A second coat of material may then be applied if deemed necessary.
As a clear matt sealer, apply two coats of Resbuild Screedseal at a nominal rate of 5m²/l per coat to the coving or upstands
You can read more about surface preparation and curing on the technical datasheet.
Not quite what you’re looking for? Browse our full Resin Building Products Range here.
Learn more about Resin Building Products here.