Mapei Latexplan No Ammonia 24.4Kg Bag and Bottle

£25.15£1,130.00 exl. VAT



Two part, Fast setting, Cement based levelling compound suitable for use over most existing adhesive residues including bitumen and onto plywood substrates. Resilient floor coverings can be installed after 4 hours.

  • Suitable for use with underfloor heating
  • Moisture tolerant; can be applied below surface applied DPM
  • Low Odour
  • Can receive light foot traffic after approx. 60 minutes
  • Ready to receive floor coverings after 4hrs depending on ambient temperature



Mapei Latexplan No Ammonia

Mapei Latexplan No Ammonia differences in thickness between 3mm to 10mm on new and existing substrates. It can be used over most existing adhesive residues, including bitumen. Also suitable for use over plywood substrates and Mapei Mapeproof ESM and Mapeproof One Coat applied DPMs in most cases without priming. Accepts subsequent floor coverings in 4 hours. In most cases, priming is not required.

Tech Characteristics of Mapei Latexplan No Ammonia

Mapei Latexplan No Ammonia is a two-part cement based smoothing compound consisting of a grey powder (part A) containing special cements, graded silica sands and additives, to be mixed with a synthetic rubber latex (part B).

Coverage – One unit (Part A + Part B) will cover approx. 5m2 @ 3mm thickness

N.B Latexplan No Ammonia will remain a darker colour even when cured after 4 hours.


The mixed product is poured onto the prepared sub-floor and spread with a smooth edged trowel to the required thickness in one operation. Additionally, the use of a spiked aeration roller will ensure a smooth even finish that will not require any further attention prior to the floor coverings being installed. Latexplan No Ammonia can be applied from featheredge to 10mm, although a minimum= 3mm thickness is recommended to provide the optimum absorption for the adhesive, apply at a minimum floor temperature of +5°C

All information on surface preparation, priming, mixing, and drying times can be found on the technical datasheet.


Not quite what you’re looking for? Click here to browse more of our Mapei range.

Want to see how Mapei Latexplan and other Mapei products have been used? Click here to view a range of Mapei Projects.

Additional information


20Kg Bag and 4.4Kg Bottle, Full Pallet of 48 x 20Kg bag and 4.4Kg Bottle

Suitable for Substrates

Minimum Thickness: 1mm

Maximum Thickness: 10mm

Compressive Strength @ 28 days: N/A

Walkable: 1-2 hours

Floorcovering After: 12 Hours

Suitable for Substrates: Concrete / Screed / Terrazzo / Steel / Wood / Polyurethane

Technical Information

Related Products