Ronafix Prepacked Render and Screed – 25Kg Bag

£40.00 exl. VAT

Per Unit

Description

SKU 105061410055220632 Category

Prepacked Mortar for Weatherproof Renders and Screeds

  • Waterproof
  • Frostproof
  • High compressive strength
  • High tensile strength
  • High flexural strength
  • Trafficable after just 24 hours

Contents

Description

Ronafix Prepacked Render and Screed – Mortar for weatherproof renders

Ronafix Prepacked Render and Screed – Mortar for weatherproof renders. Ronafix Pre-packed Render / Screed is a pre-packed mortar supplied complete with dry powders and a bottle of polymer gauging liquid. Ronafix Pre-packed Render / Screed will provide a weatherproof mortar. Both are bonded with Ronacrete Standard Primer.

Uses

Applying the product:

As soon as the material is mixed it must be applied to the wet/tacky primer, using conventional plastering techniques, ensuring total contact with the substrate and ensuring the render does not slump or slide away from the surface. If applying two or more coats of Ronafix Pre-packed Render / Screed, each intermediate layer must be combed to provide a key for the next layer. The following layer should be applied, having first applied Ronacrete Standard Primer, after the previous layer has firmed up sufficiently to support its weight without slumping or pulling away. Keying and priming between layers is necessary to ensure total adhesion through the render.

Curing

As soon as possible after finishing the surface cure the surface with Ronacrete Curing Membrane. Alternatively use tight fitting polythene to prevent rapid moisture loss and surface cracking and crazing.

Working Temperatures

Ronafix Pre-packed Render / Screed may be used in most weather conditions and in a wide temperature range, typically from +3°C to 25°C and above. Note that at high ambient temperatures the working time of the mix will be reduced; it will be increased at lower temperatures. Ideally materials should be between 10oC and 20oC before use.

 

Not quite what you’re looking for? Browse more of our Ronacrete range.

Want to see how Prepacked Render and Screed and other Ronacrete products have been used? View a range of Ronacrete Projects.

Additional information

Suitable for Substrates

Minimum Thickness: 6mm

Maximum Thickness: 50mm

Compressive Strength @ 28 days: 70 N/mm2

Walkable: 24 Hours

Finished Floor Laying After: 10 days

Suitable for Substrates: Concrete

Brand

Ronacrete

The Ronacrete group manufacture a comprehensive range of specialist materials for installation by expert contractors. For over 40 years, Ronacrete has been at the leading edge of product development and performance and across their six ranges, the company offer specialist solutions for a huge range of applications, from waterproofing and tanking to resin surfacing and specialist screed solutions.

Technical Information