Tramex Hygrohood – Relative Humidity Tester

£165.00

Description

SKU TRAMEXHYGRORHT Categories ,

Calibration Specification:

  • The Hygrometer is factory calibrated to 75% RH at 20°C.
  • The calibration should remain stable for a minimum period one year from date of purchase unless the unit is physically damaged or misused.

Contents

Description

Tramex Hygrohood – For Relative Humidity Testing

Tramex Hygrohood – Relative-Humidity Tester. Insulated humidity hood with built in electronic hygrometer enabling non-destructive Relative Humidity testing of all screeds and other surfaces.

  • Non destructive test
  • Quick and easy to use
  • Measure Relative Humidity and so corresponds to the requirement of British Standards

Tramex Hygrohood – Relative-Humidity Testing Uses

For best and most accurate results, tests should be carried out after the internal conditions of the building in which the slab is located have been at normal service temperature and humidity for at least 48 hours. All artificial heating or drying equipment should be turned off at least 96 hours before final readings are attempted, otherwise, results may not accurately reflect the amount of moisture present or moisture movement in the slab during normal operating conditions. Avoid testing in locations subject to direct sunlight or sources of heat. Use of artificial aids for accelerated drying of concrete is not recommended. If they are being used it is recommended they should be turned off at least four days before taking final readings. It is advantageous to know the background of the site e.g. when the floor or screed was poured, thickness levels, etc.

Not quite what you’re looking for? View our full Tramex range here.

You can read more about the Tramex range and their products here.

Brand

Tramex

Tramex Products

Technical Information

Related Products