Ardex AM100 Tiling Render
ARDEX AM100 tiling render is a grey rapid-setting sand and cement render that can receive tiling in as little as 2 hours after application. It is preblended, requiring only the addition of water to produce a slump free mortar that can be applied 2-30mm thick in a single coat.
Ardex AM100 Tiling Render Uses
ARDEX AM100 tiling render can be applied from 2mm up to 30mm thickness in a single coat, and is particularly useful in situations where the drying time and thickness of conventional sand and cement renders cannot be accommodated. ARDEX AM 100 tiling render is suitable for rendering suitably prepared in-situ concrete walls, brickwork and block work. ARDEX AM 100 is suitable for use in internal and external areas, including swimming pools.
Approximately 1.3kg of Ardex AM 100 powder/m2 / mm.
i.e. one 25kg bag will cover approximately 3.2m2 at 6mm thick.
ARDEX AM 100 should firstly be applied as a 1 – 2mm thick skim coat / bonding layer, before the remaining required thickness (up to 30mm) is applied fresh-in-fresh. When applying to the deeper thicknesses over larger areas, the material can be applied in two layers if preferred. For example, for a total depth of 30mm, a 25mm thick later can be applied, allowed to harden and then followed by a 5mm thick layer. When applying in two layers, ensure the top layer is always thinner than the initial layer.
NOTE: The substrate must be prepared, whether internal or external, so as to guarantee the adhesion of the render mortar when applied.
Not quite what you’re looking for? Click here to browse more of our Ardex range.
Want to see how Ardex AM 100 and other Ardex products have been used? Click here to view a range of Ardex Projects.