Cemfloor Level Plus 25Kg

Description

Cemfloor Level Plus 25Kg is a specially formulated ultra-thin self-levelling cementitious floor screed. Cemfloor Level Plus is a mixture of Cemfloor binder, cement, water and a suitable sand.

Cemfloor Level Plus is a high-performance screed which complies with BSEN 13813:2002. Cemfloor Level Plus is specifically designed for use as a thin section screed at a depth between

12-50mm and to bridge the gap between bagged SLU materials and standard screeds

• Thinner sections; up to 70% less compared to traditional screeds.
• Up to 70% weight saving compared to traditional screeds (24kg/m2 at 12mm depth).
• Very cost efficient compared to bagged self-levelling compounds.
• Ready mixed solution = No site mixing, no bag storage/disposal, ensures high productivity
• Suitable for use with various flooring systems e.g. low profile UFH panels.
• Minimal Drying Shrinkage (<0.4mm/m).
• Easy Installation (Reduces time & costs).
• Larger floor area without joints
• Foot traffic after 24–48 hours
• Can be applied in wet areas
• Reduced drying times
• Self-compacting
• Can be loaded after 7 days
• No risk of contamination with other flooring products
• No Surface Laitance (Dust) after curing

Substrate

Cemfloor Level Plus 25Kg Screed is designed for use as a thin levelling screed on a new or existing concrete substrate, as a floating screed over thermal or acoustic insulation with a minimum compressive strength of 100kPa, or as an unbonded screed on top of a plastic membrane.

When bonding to an existing substrate the substrate must have a minimum compressive strength of 25N/mm2. Surfaces must be sound and free from dust, dirt, grease, oil and any other contaminants.

Any laitance or surface treatments must be removed before use.

The substrate should be mechanically prepared to provide an open textured surface to ensure an adequate bond between the screed and the substrate. The substrate must also be primed with a suitable priming agent.