DCP Strongcoat OT DPM

Description

DCP Strongcoat OT DPM is a two pack.

Ideal for environments susceptible to oil contamination.

Strongcoat OT DPM suppresses residual construction moisture and rising dampness in concrete and sand/cement screeds.

It can be used in situations where the relative humidity level is above 75%. It is applied by brush or roller in one or two coats depending on the relative humidity of the floor.

Coverage

Strongcoat OT DPM is applied at a coverage rate of 3.5 – 3.7 m²/kg to achieve approximately 200 micron DFT per coat.

Substrate Preperation

The substrate must be clean, dry, even, dense and free from oil, grease, dust and other contaminants. A clean surface will ensure maximum adhesion between the substrate and the coating. Concrete floors must have a minimum compressive strength of 25 N/mm².