Ardex Arditex NA Self Levelling Compound

Description

ARDITEX NA 25Kg Subfloor Levelling Compound

ARDITEX NA 25Kg is a high-performance, two-part self-levelling and smoothing compound from ARDEX, designed for professional flooring preparation. This ultra-rapid setting, protein-free and ammonia-free latex levelling compound delivers exceptional adhesion, flexibility, moisture resistance, and improved flow, making it one of the most versatile subfloor levelling compounds available for commercial and domestic flooring projects.

Ideal for levelling uneven internal subfloors, ARDITEX NA can be used over almost all common substrates without priming, including concrete, cement and sand screeds, ceramic tiles, terrazzo, quarry tiles, flooring-grade asphalt, bitumen adhesive residues, plywood, and steel floors. Its advanced formulation allows direct application to damp concrete and use beneath an ARDEX Damp Proof Membrane, helping to save valuable installation time on site.

With rapid drying performance, resilient floor coverings can typically be installed after just 4 hours, while ceramic and porcelain tiles can be fixed in as little as 3 hours.

Key Features & Benefits

• Ultra rapid setting self-levelling compound
• Two-part latex levelling system for superior flexibility
• Protein-free and ammonia-free formulation
• Excellent adhesion without priming to most substrates
• Suitable over old adhesive residues, including bitumen
• Can be applied directly to damp concrete
• Compatible with ARDEX Damp Proof Membranes
• Feather edge to 12mm depth in a single application
• Up to 30mm depth when mixed with ARDEX Coarse Aggregate
• Suitable for use with underfloor heating systems
• Low odour formulation ideal for internal environments
• Excellent moisture resistance and flexibility
• Suitable for commercial and residential flooring projects

Recommended Uses

ARDITEX NA 25Kg Subfloor Levelling Compound is designed to create a smooth, level surface prior to the installation of floor coverings and tiles. It is suitable for use on:

• Concrete subfloors
• Cement and sand screeds
• Prepared terrazzo
• Flooring-grade asphalt
• Quarry tiles
• Ceramic and porcelain tiles
• Flooring-grade plywood
• Internal steel floors
• ARDEX Damp Proof Membranes

Underfloor Heating Compatibility

ARDITEX NA is suitable for use with underfloor heating systems and can be used to encapsulate under-tile heating cables and heating mats onto concrete, screeds, tile backing boards, and tiled surfaces before installing ceramic floor tiles. Its flexible formulation helps accommodate thermal movement while maintaining a smooth, durable surface.

Application Thickness

• Feather edge to 12mm in a single application
• Up to 30mm when incorporating ARDEX Coarse Aggregate

Drying & Installation Times

• Ceramic tiles can be installed after approximately 3 hours
• Resilient floor coverings can typically be installed after 4 hours

Drying times may vary depending on substrate condition, temperature, and site humidity.

Important Information

ARDITEX NA is not suitable for use beneath:

• Vinyl flooring
• Rubber flooring
• Linoleum
• Cork flooring
• Moisture-sensitive floor coverings

Flooring-grade asphalt and damp proof membranes must not be covered with more than 6mm of underlayment.

Not quite what you’re looking for?  Browse more of our full Ardex range.

Want to see how Arditex NA and other Ardex products have been used? View a wide range of Ardex Projects.