Flowcrete Isocrete PHS

£120.00£255.00

Description

  • High speed installation, dramatically shortens overall programme
  • Overnight cure for failed sand:cement screeds
  • Dust free installations. No disruption or damage to other finishes.
  • Impermeable to water
  • Significantly exceeds BS8204 BRE test category A requirements for floor screeds
  • Guaranteed to BRE Test Category A requirement for 15 years
  • Solvent free
  • Low odour
  • Installed by approved applicators

Contents

Description

Flowcrete Isocrete PHS is a two-component, solvent-free, epoxy-based primer. The product has a low viscosity and good penetrative capacity.

PHS can be used to reinforce old porous concrete and acts as an injection plastic.

NOTE

When the Flowcrete Isocrete PHS Base is mixed with the Hardener a very exothermic reaction starts (i.e. much heat is generated). As with all epoxy resins, once mixed the PHS mix should always be used quickly to dissipate the heat of reaction. If the PHS mix is not applied within 10 – 20 minutes, a lot of black smoke will be generated

Additional information

Size

2.5Kg, 10Kg

Brand

Flowcrete / Isocrete

Flowcrete Products

Technical Information

Related Products