Tilemaster Adhesives Prime Plus

£6.05£20.54 exl. VAT

Per Unit

Description

SKU 5664785485414564 Category

Priming and Bonding Agent.

  • Wall and floor primer for absorbent and non-absorbent surfaces
  • Designed to prime, stabilise and seal surfaces
  • Increases the adhesion of tile adhesives and levellers
  • Prolongs the working time of tile adhesives and levellers
  • Fast drying, 30-45 minutes to dry
  • Water based

You May Also Need...

Description

Tilemaster Prime Plus – Wall & floor primer for absorbent & non-absorbent surfaces

Tilemaster Prime plus is a highly advanced styrene butadiene polymer designed to prime, stabilise and seal substrates prior to the application of Tilemaster tile adhesives and self levelling compounds. Prime plus increases the adhesion and prolongs the working time of tile adhesives and self levelling compounds. Prime plus can be used on both absorbent and non-absorbent surfaces, internally and externally.

Tilemaster Prime Plus Uses.

Surfaces must be sound and free from dust, dirt, grease, oil and any other contaminants. Any laitance or surface treatments must be removed before use. Concrete, sand/cement screeds, anhydrite screeds and power floated concrete must be fully cured and dust removed ideally by vacuum. The temperature of the surface must be above 5°C when the Prime plus is applied. Underfloor heating must be switched off 2 days before application. Timber and over boarded substrates must be rigidly braced and sufficiently constructed to take domestic loading without movement.

APPLICATION:
Shake well before use. Prime plus should be diluted accordingly for the relevant substrate, see page 3. Apply Prime plus evenly to the whole surface to be treated with a paint roller, brush or sponge. Do not over apply as this can cause the primer to skin over, only a thin coat is required ensuring that you have 100% coverage. Wash tools after use with warm water. The drying time of Prime plus will depend on the porosity of the substrate and the ambient conditions/temperatures. In ideal conditions, Prime plus will take 30 – 45 minutes to dry. Once primed, avoid trafficking the primed area.

 

Not quite what you’re looking for? Click here to browse more of our Tilemaster Adhesives range.

Learn more about Tilemaster Adhesives here.

Additional information

Size

5L, 1L

Brand

Tilemaster Adhesives

Established in 1990, Tilemaster Adhesives is a family-run business. They are committed to offering a comprehensive range of dependable tile adhesives, grouts, self-levelling compounds and ancillary products. Their customers can trust and rely on for lasting performance. The company manufacture all of their products in their own UK premises. They manufacture to the highest quality standards. They pride themselves on offering one-to-one technical advice and support when their customers need it.

Technical Information