Ardex P82 – WB Epoxy Primer and Bonding Agent
Ardex P82 – WB Epoxy Primer and Bonding Agent. Two-component water based epoxy synthetic dispersion primer and bonding bridge. It is non-flammable and non-corrosive.
- Two part water based synthetic dispersion primer and bonding agent
- Suitable for internal use only
- Suitable for use on a wide variety of floorings
- Tack dry after 3 – 6 hours
Ardex P82 – Epoxy Primer Uses
Ardex P82 forms a priming/bonding layer on most known substrates, especially smooth or dense surfaces. For interior use only and in dry or intermittently damp locations. Use on floors which are dry and have an effective Ardex damp proof membrane, such as Ardex DPM1C and Ardex DPM 1CR. ARDEX P82 can be used as a primer and bonding bridge prior to the application of the Ardex range of cement-based tiling and flooring products.
Application for Ardex P82 – Epoxy Primer:
Surfaces should be firm and free from dust, dirt and other barrier materials. Polish, wax, grease, etc., should be removed using Ardex DGR degreaser. Ardex P82 primer must be applied in a thin even coat using a foam or short pile paint roller or paint brush, taking care to prevent the formation of puddles. Allow the applied Ardex P82 to become dry to a clear, tacky film – usually 3 to 6 hours, depending on substrate temperature and ventilation. If in doubt leave overnight. Once dried, the primed surface is ready for overlaying, however if left for more than 4 days or the film has lost its tackiness, a repeat application of the Ardex P82 primer will be necessary.
Not quite what you’re looking for? Click here to browse more of our Ardex range.
Want to see how Ardex P82 and other Ardex products have been used? Click here to view a range of Ardex Projects.