Flowcrete Flowcoat SF41 25kg

Description

Flowcoat SF41 25kg hard wearing coloured floor coating

Flowcrete Flowcoat SF41 25kg – hard wearing coloured floor coating is a high performance, solvent free, epoxy resin coating. Different grades of slip resistance can be achieved by inclusion of graded aggregate between coats.  It is also chemical resistant.

Uses

Flowcrete Flowcoat SF41 25kg may be used as a hard wearing coloured floor coating in areas such as factories, warehouses, plant and storerooms where high resistance against chemical attack is required.
Also used as a line marker in demarcation areas, may also be used for internal deck car park topcoats.

Benefits

• Solvent free, low odour
• Aesthetically attractive – brightens up dull factories and warehouses
• Seamless and hygienic finish
• Low maintenance
•  Slip resistant finish can be tailored to specific client requirements
• Nonylphenol free
• Abrasion resistant
• Hard wearing
• Chemical resistant

Coverage

Coating: Density 1.4 kg/l
1st Coat @ 0.25 – 0.3 kg/m2

2nd Coat @ 0.25 – 0.3 kg/m2

Coverage rates will vary with surface profile and temperature.

Flowcrete Flowcoat SF41 25kg Substrate requirements

Concrete or screed substrate should be a minimum of 25N/mm2, free from laitance, dust and other contamination. The substrate should be dry to 75% RH as per BS8204 and free from rising damp and ground water pressure. If no damp proof membrane is present Hydraseal DPM can be incorporated directly beneath the Flowcoat system.

All information on model specification and technical characteristics can be found on the technical datasheet.

Not quite what you’re looking for? Click here to view more of our Flowcrete/Isocrete range.

Click here to view a range of Flowcrete/Isocrete Projects.