Ardex Feather Finish – Rapid Drying Patching and Smoothing Compound
Ardex Feather Finish – Rapid Drying Patching and Smoothing Compound drys rapidly, provides a high bond to concrete, plywood, cement/sand screeds, existing sub-floor smoothing compounds and even existing ceramic tiles without the use of primers.Use this product for patching, filling and feather finishing, day work joints, ridges, gouges, depressions, uneven trowel marks, etc., in the sub-floor, as well as smoothing joints between staggered plywood sheets.
Ardex Feather Finish Patching Uses
Ardex Feather Finis is designed for use in commercial and domestic locations where the installation involves the use of resilient sheet or floor coverings such as vinyl sheet or tiles, carpet etc. The cement/sand screed, plywood or ceramic tiled sub-floors must be dry, sound and clean, free of dust, grease and other barriers that might impair adhesion to the base. In domestic applications only, Ardex Feather Finish may be installed over existing adhesive residues which are thin, sound and well bonded. The residues must not be affected by either the initial wetting from the applied mortar or the adhesive used to install the new floor covering. Ardex Feather Finish is not recommended over adhesive residues in commercial situations.
Ardex Feather Finish
Not quite what you’re looking for? Click here to browse more of our Ardex range.
Want to see how Ardex Feather Finish has been used? Click here to view a range of Ardex Projects.