Mapei Ultratop – 25Kg – Colours Avaliable

£51.40£61.96 exl. VAT

Per Unit


Silicate-based consolidator for cementitious substrates, with a high penetration capacity.

  • Ready to use
  • Low viscosity
  • High penetration properties
  • Minimum drying time of 24 hours

*Please note there is a £100 minimum order when ordering Mapei products.*


Mapei Ultratop – Fast setting self-levelling mortar

Mapei Ultratop – Fast setting self-levelling mortar, based on special hydraulic binders for abrasion-resistant flooring, thickness from 5 to 40 mm. Ultratop is a self-levelling product in powder available in light grey, white, beige, rust red, anthracite and standard (beige going on light brown) made up of special quick-drying and quick-setting binders, specially graded silica sand, synthetic resins and special admixtures developed in MAPEI’s own Research Laboratories. When mixed with water, Ultratop becomes a self-levelling compound which is easy to apply either by hand or pump in thickness from 5 to 40 mm. After setting, which takes place in only a few hours, Ultratop has a high level of compressive and flexural strength, bonds perfectly to the substrate and thanks to its special composition, dries quickly so that any further finishing coat may be applied after a very short time.

Ultratop is classified as CT – C40 – F10 – A9 – A2fl-s1 according to EN 13813:2002 Standards. CT refers to a cementitious-based product, C40 and F10 refer to the compressive strength and flexural strength, respectively, after 28 days, A9 is the Böhme abrasion-resistance coefficient and A2fl-s1 is the fire-reaction class. Around 3 days after application, Ultratop may be dry-polished using diamond grinding disks to get a shiny, reflective or similar finish on natural stone. Ultratop may also be used to make flooring with a “Terrazzo alla Veneziana” effect, in which the dry grinding process brings out the characteristics of the aggregates (colour, shape and size) to create flooring with an exclusive, original finish which is quick and easy to install.

Mapei Ultratop – Fast setting self-levelling mortar Uses

Ultratop is used internally in public and industrial buildings, for levelling and smoothing new or existing concrete and ceramic substrates in thickness from 5 to 40 mm, to make them suitable for heavy pedestrian use in shopping centres, offices, shops, showrooms and areas where rubber-wheeled vehicles are in use. Ultratop may be left as a finished floor due to its high mechanical strength and resistance to abrasion and thanks to its versatility, is suitable for numerous applications in the decorating sector of buildings for civil use.

Application examples of Mapei Ultratop – Fast setting self-levelling mortar

  • New floors in shopping centres, supermarkets, restaurants, shops and showrooms.
  • Abrasion-resistant floors on concrete, old terrazzo, ceramic tiles and natural stones.
  • Industrial floors that must be protected with epoxy coatings and paints in chemical and food processing plants, textile mills and tanneries.
  • New, polished floors inside shopping centres, showrooms, shops, restaurants and flats.
  • New floors, such as “terrazzo alla veneziana”, inside homes, offices, shops, museums, theatres and exhibition halls when used in combination with natural aggregates

Not quite what you’re looking for? Click here to browse more of our Mapei range.

Want to see how Mapei Ultratop and other Mapei products have been used? Click here to view a range of Mapei Projects.

Additional information


Standard, White, Anthracite, Light Grey



Since its beginnings in 1937 Mapei has grown so that it can now claim to be the worlds largest producer of adhesives and chemicals for the construction industry. The company has always believed in investing strongly in R&D and product development, and it is perhaps this more than anything that has led to their success. Mapei has been in the UK since 1989 with a manufacturing plant now producing over 100,000 tonnes across a vast product range.

Technical Information